It’s springtime. Therefore there is a lot of storms and rainy days, all the while humidity is also usually at it’s highest. This is prime conditions for mould spores to spread their wings and multiply. Mould is not only unsightly and smells awful, it also has negative impacts on our health and wellbeing.

So how can we go about mould-proofing our home for the wet season?

Identify any potential problematic ‘zones’

Do you notice any condensation on your windows or blinds in the morning when you get up? Do you wipe it down to dry it? Blinds, curtains and shutters are often hotspots for mould growth as that is where a lot of night time condensation gathers.

Have you noticed any overhead dripping pipes outside? Sometimes these dripping pipes can cause issues with moisture build-up that can go on to cause ‘rising damp’ that can go unnoticed until it is a big problem. It is best to check the reason why these pipes are dripping, and lead them away from your building and to a drainage area.

What about your laundry? Is the dryer correctly connected to an outdoor vent? Or are you drying your clothes is a hot steamy laundry that is the perfect breeding ground for mould growth. How are the extraction fans in your bathrooms? Are they strong enough to remove steam and condensation from your bathrooms?

Are there any drainage problems you have noticed around your property after heavy downpours? Water pooling in areas up against your building is not a good sign.

Any and all of these can lead to damp and, ultimately, mould. Take care to address such issues with effective moisture control at your earliest convenience.

Good Ventilation in your property can be the key

When cooking always use your range hood fan so that the steam escapes. Have your clothes dryer connected to an outdoor vent so that the moisture escapes outside rather than steaming up your laundry. If you are unable to do this, open up a window, or add a screen door to your laundry for ventilation. When you can, open up your bathroom windows after showers so that the bathroom can completely dry out.

Airing out bedrooms in the mornings is also a great move to stave off damp and combat mould growth.

For more information on the BEST ventilation ideas for your home check out www.zephyrventilation.net.au.

Clean and inspect your roof gutters

Always clean out your gutters regularly, and if you are unable to do this yourself, have a professional do it for you. During your clean out you can see if there are any cracked and damaged guttering that may need replacing. Having a professional do this at the time can also mean they may be able to repair or replace cracked or damaged guttering at the same time as the cleaning is being done. Cracked and damaged roof gutters can allow moisture to seep through to areas where it shouldn’t be, allowing the build up of damp and eventually mould.

Keeping your roof gutters cleaned, and in good condition on a regular basis is one of the most effective moisture control techniques. Not only does it help with moisture in your roof cavity, but also leaking gutters can cause damp build up in areas of your property that would not normally happen if gutters were maintained correctly.

Have your roof inspected on a regular basis

Having your roof professionally inspected on a regular basis will ensure that any potential leak hazards can be found and rectified. It could be anything from cracked and damaged tiles to old or incorrectly installed skylights that can lead to roof leaks. Having a regular inspection will allow the professional to discover any potential leaks that can be repaired so as to prevent any future risk of damp and mould growth.

Roof tiles can break easily when they’re stepped on, so it’s important to take care if accessing your roof. Tiles can also become broken or cracked by branches dropping onto them, and even from children throwing items onto the roof, such as heavy balls and cricket bats. Skylights can also problematic for leaks. It’s possible for installation to be performed incorrectly, leaving gaps where water can get through. They can also become cracked and damaged by hailstones and branches. The usual wear and tear is also a factor, with older skylights developing more leaks.

For roofs that are constructed from a metal material such as steel or tin, it’s important to watch for the signs of rusting, as severe rust can lead to holes developing. Identifying rust early and taking steps to repair any damage can help prevent any extensive problems leading to leakage. Chimneys are another common cause of roof leaks, with inadequately waterproofed chimneys often being the complication.

What’s Next?

If you’re not quite sure where to start when it comes to mould-proofing your home, or you have discovered a bit of a damp mouldy smell coming from an area in your house, or perhaps you’ve had your roof checked and there are some issues with leakage – You may need some help to ensure that the problems don’t escalate. Feel free to give us a call at Mould Pro today so that we can assist you with mould-proofing your home before the next lot of rain comes through.